Sewage Tanker for Transporting Effluents – Hazardous Substances
One compartment
3 axles with air suspension
2” towing pin
8” st-37 steel piping.
mounting for the spare wheel.
An ABS system pursuant to transport regulations
2-speed parking legs.
Climbing ladder, foot tread and safety railing
The tank undergoes sand blasting, a primer and topcoat
Markings pursuant to the customer’s requirements.
The electricity system is compatible with the Israeli Ministry of Transport standards
Functional inspection of the Standards Institution of Israel
Blueprints and authorizations
Tank
The tank’s capacity – XXX liters of effluent + XXX liters of water –according to the customer’s re-quirements
Planning pressure – pursuant to the standard
Material– Steel /stainless steel
The division – pursuant to the customer’s requirements
Manholes– pursuant to the customer’s requirements
The Tank Chassis– will be constructed pursuant to the vehicle’s chassis including a rear slope that guarantees full emptying of tank.
Foot treads– along the right side of the tank
Dual trap – installed inside the tank to prevent overflow
Indication eyes – 2 will be installed on the upper section of the tank for indicating the quantity of liquid
The System’s Accessories – (Vacuum Pressure)
A diesel engine pursuant to the customer’s requirements
Pressure pump pursuant to the customer’s requirements
Vacuum pump pursuant to the customer’s requirements
Storage reel for a 100 meter pressure pipe
A secondary manual reel for a R2 25 meter 1/2” diameter pipe .
The installation of line filters for the system.
The installation of a By – Pass between the two compartments of the tank including a non-return valve
Unloading pipe and valves:
– A 4” diameter discharging pipe to the rear including a 4” gate valve – pneumatic activationת.
– A 6” diameter discharging pipe to the rear including a 6” gate valve – pneumatic activationת.
– , side closets
– Control panel that includes a control lever for activating and control over the various systems and indication meters
Accompanying Accessories for the Sewage Tanker
Rear wings (PVC)
Toolbox
Mudguards
An installation for a jerry can + a water jerry can and soap dish
Rear bumper
Mounting for the spare wheel
3 installations for a 6 Kg fire extinguisher (not including the fire extinguishers)
2 stopping wedges
Rear climbing ladder
Installation for storing gloves
Electrical System
Rear illumination installation
Side illumination installation
Installation pursuant to the transportation regulations and the Standards Institution of Israel
Finishing treatment
Cleaning and preparation for painting + primer
General external painting pursuant to the customer’s requirements
Signage and hazardous substances marking
The logo pursuant to the customer’s requirements
General volume markings, marking for each compartment
Inspections and Authorizations
Inspection of compliance with the blueprints – a competent laboratory
Inspection of compliance with the standards – a competent laboratory
Functional inspection – competent laboratory
The tanker will be supplied with the documents and blueprints necessary for licensing.
